Mishimoto MMICP-DMAX-17CP Cold-Side Intercooler Pipe and Boot Kit, fits 6.6L Duramax L5P '17-'19, Polished

Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with the Mishimoto cold-side intercooler pipe and boot kit. The factory cold-side pipe for the L5P is a measly 2.5in that chokes the engine and tight bends create even more restriction. The Mishimoto cold-side intercooler pipe is 3in in diameter throughout with smooth transitions to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Our cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new o-ring and spring clip to ensure a secure and leak-free fit. Unlike other available cold-side pipes on the market, our pipes retain the intake air temp harness mounting location for safe and secure wire routing, just as Chevy/GMC intended.The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P cold-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all our Duramax products, this cold-side intercooler pipe and boot kit includes our Mishimoto Lifetime Warranty for a lifetime of performance.
Cold-Side Intercooler Pipe and Boot Kit, fits Chevrolet/GMC 6.6L Duramax (L5P) 2017-2019

Features and Benefits
Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
Requires no additional tuning
Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
Available in polished or wrinkle-black powder coated finish
Mishimoto Lifetime Warranty
Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
Up to 16% less restrictive than stock piping
Includes new quick-disconnect O-ring and spring clip
Eliminates failure-prone stock throttle valve connector
Retains temp sensor harness mount for safe and secure wire routing
3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
Internal bead roll ensures secure connection between coupler and throttle valve
CNC-machined quick-disconnect ensures precise, leak-free fit
Additional bung can be drilled and tapped for sensors
Requires no additional tuning
Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
Available in polished or wrinkle-black powder coated finish
Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
Eliminates stock resonator for improved flow
Up to 55% less restrictive than stock piping
Up to 16% less restrictive than stock piping
Bung can be drilled and tapped for additional sensors
Requires no additional tuning
Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
Available in polished or wrinkle-black powder coated finish
Mishimoto Lifetime Warranty
Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
Up to 55% less restrictive than stock piping
Includes new quick-disconnect O-ring and spring clip
Hot-side eliminates stock resonator for maximum flow
Includes new quick-disconnect O-ring and spring clip
Eliminates failure-prone stock throttle valve connector
Retains temp sensor harness mount for safe and secure wire routing
Internal bead roll ensures secure connection between coupler and throttle valve
CNC-machined quick-disconnect ensures precise, leak-free fit
Additional bungs can be drilled and tapped for sensors
Requires no additional tuning
Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
Available in polished or wrinkle-black powder coated finish
Eliminates failure-prone stock throttle valve connector
Retains temp sensor harness mount for safe and secure wire routing
Internal bead roll ensures secure connection between coupler and throttle valve
CNC-machined quick-disconnect ensures precise, leak-free fit
Additional bung can be drilled and tapped for sensors
Cold-Side Intercooler Pipe and Boot Kit, fits 6.6L Duramax L5P '17-'19, Polished


Install Difficulty: 3
OptionLabel: Polished
SellingPoint01: Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
SellingPoint02: 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
SellingPoint03: Up to 16-percent less restrictive than stock piping
SellingPoint04: Includes new quick-disconnect O-ring and spring clip
SellingPoint05: Eliminates failure-prone stock throttle valve connector
SellingPoint06: Retains temp sensor harness mount for safe and secure wire routing
SellingPoint07: Internal bead roll ensures secure connection between coupler and throttle valve
SellingPoint08: CNC-machined quick-disconnect ensures precise, leak-free fit
SellingPoint09: Additional bung can be drilled and tapped for sensors
SellingPoint10: Requires no additional tuning
SellingPoint11: Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
SellingPoint12: Available in polished or wrinkle-black powder coated finish
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2017-2019 Chevrolet Silverado 2500 HD w/ 6.6L Duramax L5P--2017-2019 Chevrolet Silverado 3500 HD w/ 6.6L Duramax L5P----2017-2019 GMC Sierra 2500 HD w/ 6.6L Duramax L5P--2017-2019 GMC Sierra 3500 HD w/ 6.6L Duramax L5P
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): 13
TechSpec Core Length (in): 24
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Aluminum Intercooler Pipe w/ Bung--(1) Aluminum Intercooler Pipe w/ O-Ring and Spring Clip--(2) Silicone Boots with DuraCore Technology--(4) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A